Bose VIRTUALLY INVISIBLE 191 User Manual download pdf (Page 19)



TEPS TO INSTALLING

English Français NederlandsDeutsch Italiano

Attaching rectangular grille frames

1. Line up the curved edge of the grille with the curve over the Bose

logo and press that

edge into the speaker frame first (Figure 24).

2. Press the top of the grille firmly into place until you feel some resistance. When the grille

lines up flush with the frame of the speaker, it is seated properly.

Figure 24

Snapping the grille into

place

If the speaker looks crooked

When you step back from the wall, you may notice that the speaker is not straight. If so, it is

easy to adjust the speaker slightly:

1. Remove the grille by inserting a thin-bladed tool between the speaker frame and the grille

and carefully prying it out.

2. Slightly loosen each of the four dogleg clamp screws, labeled WALL.

3. Press on the sides of the speaker frame to shift it up or down into the proper position.

4. Stand back to make sure it is straight. Repeat step 3 if it is not.

5. Tighten all four dogleg clamp screws.

6. Reattach the grille to the front of the speaker.

Attaching round grilles

1. Line up the Bose logo in the desired position.

2. Tuck the Bose logo into the speaker frame first. See Figure 25.

3. Work your way to the top of the grille frame, using both hands to tuck the grille tabs into

the frame. Be careful not to permanently bend the grille tabs.

Note:

When the grille is inserted into the frame, the logo can not be re-positioned. Take care to

insure it is in the desired position before pressing the entire grille into the frame.

Figure 25

Attaching round grilles

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 143 144

No comments

Bose VIRTUALLY INVISIBLE 191 User Manual Page 19