Bose SoundLink Wireless Mobile speaker Operations Instructions download pdf (Page 19)

19

OPERATION

Tab 6, 14

English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13

Tab 8, 16Tab2, 7, 15

Operating on battery power

A fully charged battery provides approximately

three hours of use at maximum volume. The

rate of battery discharge varies with the volume

setting. You can extend the battery playback

time by reducing the volume.

Checking the battery

The battery status indicator is normally off to

conserve battery power. To check the charge

level, press and hold the power button and

observe the battery indicator.

Battery protection mode

When the SoundLink

®

speaker is unplugged

and unused for more than 14 days, it enters

battery protection mode to preserve battery

power. To reactivate the speaker, connect it

to AC (mains) power (see “Charging the

Battery,” below). You can immediately use the

system while the battery charges.

Charging the battery

The battery status indicator on the SoundLink

®

speaker flashes red when the battery needs

charging. The battery can be charged whether

the cover is opened or closed.

To charge the battery

Plug the power cable into the DC POWER

connector on the back panel of the

SoundLink

®

speaker. Then plug the power

pack cord into a live AC (mains) outlet. The

speaker emits a tone to confirm the power

connection. Recommended charging time is

3 hours. The battery status indicator indicates

charging status.

Green: ..............70% or more of full charge

Yellow: .............20% to 70% of full charge

Red: .................20% or less (charge needed)

Yellow: ...... Battery charging

Off: ........... Charging cycle done

Chihuahua.book Page 19 Wednesday, March 23, 2011 2:49 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments