Bose 50 User Manual download pdf (Page 37)

AM189854_05_V.PDF October 17, 2001 35

Using the system with external components

Follow the instructions on pages 12-15 for connecting components.

Turn on your component directly or by using its remote control. Press VOLUME ▲ or ▼ on

your Personal™ music center to raise or lower the volume. Control all other functions at the

source, referring to its owner’s manual if necessary. To begin, make sure the component is

turned on and a tape, CD, DVD, laserdisc, etc. is loaded. If an external component sounds

significantly louder or softer than other sources, see “Equalizing the volume levels of external

sources” on page 37.

Note:

The Lifestyle

50 system cannot turn a connected component on or off.

Turning the system on and selecting the component

Press VIDEO 1, VIDEO 2, AUX, or TAPE on your Personal music center to select the desired

component. This turns your system on and selects the component connected to that input. If

the system is already on, this button selects the component.

The appropriate display indicator appears when the system is on and the component is

selected.

CAUTION:

The magnetic field from the Acoustimass

module is not an immediate risk to

your video tapes, audio tapes, and other magnetic media. However, you should not store

tapes directly on or near the Acoustimass module.

Using a tape recorder with your system

If you are listening to any source except TAPE, the output signal of that source is directed to

the RECORD OUT jacks.

Note:

The ROOM outputs of the Lifestyle

50 system are designated by the letters A through

D. In a multi-room system, the source that is playing in the room designated by the letter

closest to the begining of the alphabet is sent to the RECORD OUT jacks.

You may also specify a source to be directed to the RECORD OUT jacks even if you are not

listening to that source. To do this:

1. Select RECORD OUT with the MENU button. The words RECORD OUT are displayed

under the source display area (Figure 38).

2. Select a source to record. The selected source appears in the source display area in place

of the dashes (Figure 38). If you want to remove your RECORD OUT selection, press

CLEAR. The dashes reappear.

The selected source stays on until you turn RECORD OUT off. If the CD changer is

selected for RECORD OUT, it shuts off after 24 hours if you have not turned it off sooner.

3. When you are ready, set the tape deck to record.

Figure 38

The RECORD OUT menu

display

Operating Your Lifestyle

50 System

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Comments to this Manuals

No comments

Bose 50 User Manual Page 37

Comments to this Manuals

Related products and manuals for Home Theater Systems Bose 50