Bose CineMate 520 Technical Information Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
30 - English
Problem What to do
Poor or
distorted
sound
Remove all protective films from the system.
Secure all cable connections on the speakers, TV, and connected sources.
If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
®
module.
- Pair the Acoustimass module with the console (see “If your console
cannot find the Acoustimass
®
module”).
If using the analog or connector, decrease the volume on your source.
Factory reset the system (see page 31) and run the ADAPTiQ
®
audio
calibration
(see page 19).
Intermittent
sound
Secure all cable connections on the speakers, TV, and connected sources.
Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass
®
module
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1. Unplug the Acoustimass module.
2. Press
on the remote control.
3. Press
until 15 PAIR ACOUSTIMASS appears on the display.
4. Press
.
Plug in Acoustimass appears on the display.
5. Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
Care and Maintenance
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments