Bose CineMate 520 Technical Information download pdf (Page 19)

English - 19

Running the ADAPTiQ

audio calibration

The ADAPTiQ audio calibration customizes the sound of the system to the

acoustics of your listening area by taking ﬁve audio measurements. To perform

an audio calibration, you need 10 minutes when the room is quiet.

1. Put the ADAPTiQ headset on your head.

During the ADAPTiQ audio calibration, a microphone on the top of the

headset measures the sound characteristics of your room to determine

optimal sound quality.

2. Insert the ADAPTiQ headset cable into the connector on the console.

3. Press

on the remote control.

4. Press

until 14 ADAPTiQ appears on the display.

5. Press

6. Follow the voice prompts until the system completes the process.

7. Unplug the ADAPTiQ headset from the console and store it in a safe place.

Note: If you move the system or any furniture, run ADAPTiQ again to ensure

optimal sound quality.

Finishing Setup

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

No comments

Bose CineMate 520 Technical Information Page 19