Bose X User Manual download pdf (Page 27)

EADSET CARE AND MAINTENANCE

Headband cushion

1. Remove the cushion as described in “Headband cushion

replacement” on page 29.

2. Place the cushion in a solution of water and a mild detergent.

3. Allow the cushion to air dry, then, reattach.

Removing environmental moisture

If the protective inner screen becomes damp, due to environmental

moisture such as light rain, dew, perspiration, or condensation, allow

it to air dry only. Do not use electric heaters, blowers, or hairdryer

type devices to dry the inner screen.

If the headset is immersed in liquid, do not use it. Contact the Bose

Aviation Headset Department for assistance.

Replacing parts

Through normal use, parts like windscreens and ear cushions may

require periodic replacement.

Microphone windscreen replacement

1. Remove the band that secures the windscreen by rolling the

band from the tip of the microphone.

2. Gently pull the windscreen off of the microphone.

3. Slide-on the replacement windscreen and make sure that it fits

completely over the microphone.

4. Roll a new band to the proper position, about

inch from the

end of the windscreen, to secure it.

Ear cushion replacement

1. Grasp the ear cushion skirt where it folds into the slot on the ear-

cup (Figure 21).

2. Gently pull the ear cushion skirt up and away from the earcup.

Figure 21

Pulling the ear cushion skirt

away from the earcup

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

No comments

Bose X User Manual Page 27