Bose X User Manual download pdf (Page 25)

HEADSET CARE AND MAINTENANCE

Instructions for continued airworthiness

Bose recommends following the general care and maintenance

instructions in this guide. With normal use, items such as wind

screens and ear cushions may require periodic replacement. If

cleaning or replacement of these items is needed, follow the

recommendations on the following pages. All other care and

maintenance, in and out of the warranty period, must be performed

by Bose or an authorized dealer. Other maintenance is performed by

condition only.

CAUTION: Do not immerse the headset in water or any other liquid.

Cleaning the headset

Clean only those parts listed below according to the instructions.

General cleaning

Gently wipe the outside surfaces of the headband, connectors, plas-

tic parts, and headband cushion, using a soft cloth moistened with

water and mild soap. Take special care when cleaning the ear cush

ions and the outside surfaces of the earcups, as described below.

Earcup TriPort

headset openings

The TriPort headset openings, shown in Figure 20, must remain clean

and free of debris. Check to be sure that openings are clean before

each flight.

Figure 20

TriPort headset openings on

one earcup

TriPort headset

openings

When wiping down the headset, be sure not to force any dirt or

debris into the openings. Carefully use tweezers, if necessary, to

remove foreign matter that may be lodged in the openings. Do not

blow air into or vacuum the openings.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Bose X User Manual Page 25