Bose X User Manual download pdf (Page 12)

ETTING YOUR HEADSET READY FOR USE

Figure 7

Positioning the mic cable

assembly on the preferred

earcup

Connector

pins

Access

cover

Cable

assembly

Connector

pins

L for left

4. Press the assembly onto the connector pins until it is fully

engaged and the cable assembly is flush with the earcup.

CAUTION: Do not apply excessive force, which may result in earcup

damage.

5. With the screw threads properly aligned, tighten the screws.

6. Rotate the microphone boom into position so it will be near your

mouth when you put on the headset. The label should be facing

your lips.

7. Attach the access cover to the connector panel on the earcup

that does not have the boom mic attached. Align the screws and

tighten them to secure the cover.

• If you moved the boom mic from one earcup to the other, reuse

the access cover you removed earlier.

CAUTION: Be sure to try the headset and test its operation before

flight.

Clothing clip

Use the clothing clip (Figure 8) for attaching the control module to

your clothing, a safety harness, or an aircraft door pocket. Pressing

on the end of the clip allows you to reposition it along the cable.

Figure 8

Moving the clothing clip

along the cable

Press to release

CAUTION: Do not attempt to clip onto surfaces that are more than

-inch thick.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Bose X User Manual Page 12