Bose X User Manual download pdf (Page 9)

Pivot

Block

Figure 7

Unwind the cable and remove it

from the groove.

3. If you are changing it from right side to left,

route the cable in a small loop to the right

of the nrKsided block in the center of the

headband. then to the left and along the

back of the headband (see Figure 8). This

step prevents excessive strain on the

cable.

Figure 8

Route the cable in a loop to prevent strain.

4.

5.

6.

Thread the cable through the groove in the

back of the other pivot block.

Wrap the cable around the other earcup

cable by passing the end betv.ieen the

yoke arm and earcup cable twice, from

back to front.

Place the foam pad in the headband cover

(see Figure 9). Wrap the cover around the

headband with the opening toward the

rear. Smoofri the Velcro down and snap

the cover together at both ends.

FoamPa<3

Headband

Cover

Figure 9

Replace the headband cover and foam pad.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments