Bose X User Manual download pdf (Page 3)

Congratulations on your purchase of

the Bose' Aviation Headset.

Description

The Bose AviaUon Headset uses an ad

viced combination of electfoacoustical

noise reduction circuitry ar>d a patented

cushioning system to significantly reduce

aircraft noise. The Bose Headset actively

reduces noise elements in addition to muffling

noise. The patented Clear Comfort“ cushions

require only slight pressure to provide high

passive noise attenuation. Asa result, this

Headset can be worn comfortably for

extended periods.

For proper operation, all Bose Aviation

Headsets must be connected toa Bose

Headset interface. The interface pov/ers the

Headset's active noise reducing electronics

and matches the Headset to the aircraft's

avionics.

U

'sing the Bose

Aviation Headset

ATTENTION: With the Headset's combina

tion of both active and passive attenuation,

typical aircraft sounds (for example, those

from engines, propellers, warning alarms, and

other sound sources) may sound different

to you.

We strortgly recommend that you erasure

you can hear and recognize these sounds

vrtiite you are using the Bose Aviation

Headset white operating any aircraft

In addition, we are aware that in-flight entertain

ment systems are availat^. Therefore, should

you choose to listen to this entertainment

through a Bose Headset while piloting, we

remind you. asa respor^bie pilot, to limit the

volume to safe levels so that rt does not

interfere with your ability to hear informa

tional sounds, such as those emitted by

warning alarms.

For proper Headset fit

NOTE: The Headset should be worn with the

sloped surfaces of the earcups facing forward.

Follow these suggestions to achieve maximum

comfort and performance.

Adjust both sides of the headband equally to

provide a balanced force on your head. To

achieve a good seal, lightly grasp both

earcups and position them so that your ears

are completely inside the Clear Comfort“

cushions.

If you experience either a hiss or a lov/

rumbling sound, this may indicate an improper

fit. Extending the headband slightly should

correct this condition. Wearing hats or glasses

with thick temples may interfere and cause a

problem.

Final adjustment is best accomplished in a

noisy erwironmem with the Headset system

turned on. Then, reposition both earcups until

the Headset seems quietest.

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments