Bose Lifestyle Surround Sound Speaker System Operations Instructions download pdf (Page 80)

To enjoy the same function as the unit,

select “MAIN UNIT.”

When “TUNER FM” or “TUNER AM” is

selected on the unit, you can only select the

same band for the tuner on the S-AIR

receiver. In this case, when you select other

than “TUNER FM” or “TUNER AM” on

the unit, you can select any band for the

tuner on the S-AIR receiver.

4 Adjust the volume on the S-AIR

receiver.

Note

• When the sound is other than 2 channel stereo, multi

channel sound is downmixed to 2 channel.

• The sound of the S-AIR receiver may be cut off by

operation of the unit.

To control the system from the

S-AIR receiver

You can control the system from the S-AIR

receiver by using the following buttons.

For details, refer to the operating instructions of

the S-AIR receiver.

You can enjoy the S-AIR receiver while the unit

is in standby mode by setting “S-AIR STBY” to

“ON.”

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “S-AIR

STBY” appears in the front panel

display, then press or c.

3 Press X/x to select the desired setting.

• “ON”: You can enjoy the S-AIR receiver

while the unit is in standby mode or turned

on.

• “OFF”: You cannot enjoy the S-AIR

receiver while the unit is in standby mode.

The default setting differs depending on the

model.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

Note

• When you set “S-AIR STBY” to “ON,” the power

consumption during the standby mode increases.

• When you turn the system off while “S-AIR STBY”

is set to “ON,” “S-AIR” flashes (when sound

transmission between the unit and S-AIR receiver is

not established), or lights up (when sound

transmission between the unit and S-AIR receiver is

established) in the front panel display.

• If you turn the system off with the disc tray opened

while “S-AIR STBY” is set to “ON,” the disc tray

may not close automatically.

• When the wireless transmitter is not inserted in the

unit, you cannot set “S-AIR STBY.”

• “S-AIR STBY” is set to “OFF” automatically when

the wireless transmitter is removed from the unit.

It is easy to set the same ID for the unit and an

S-AIR sub unit, such as a surround amplifier or

S-AIR receiver, to establish sound transmission.

However, neighbors may also receive your

system’s sound if IDs are the same, or you may

receive the sound from neighbors. To prevent

this, you can identify the unit with a specific

S-AIR sub unit by performing the pairing

operation.

When you perform pairing

Before pairing, sound transmission is

established by the ID (example).

Press Operation

H, X, x,

./>

Share the same operations on the

remote and unit.

S-AIR CH Change the function of the system.

Enjoying the S-AIR receiver

while the unit is in standby

mode

For the S-AIR receiver

Identifying the unit with a

specific S-AIR sub unit

(Pairing operation)

For the surround amplifier

For the S-AIR receiver

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

Comments to this Manuals

No comments

Bose Lifestyle Surround Sound Speaker System Operations Instructions Page 80

Comments to this Manuals