Bose LIFESTYLE V35 Technical Information Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
26 – English
CARE AND MAINTENANCE
Resetting the system
1. Press and hold the power button on the control console for 5 seconds or until the
power light on the control console changes to red.
The power light on the control console changes to red when the system shuts down.
2. Press and release the power button on the control console to restart the system. The
power light changes to blinking green and then solid green when the system is on
and ready to use.
3. If you still cannot operate the system using the remote, try the next procedure to pair
the remote with the control console.
Pairing the remote with the console
You may need to perform this procedure if you are replacing a remote or if
troubleshooting instructions recommend it.
1. Make sure your system is on. If not, press the power button on the control console.
2. Hold the remote close to the control console.
3. Press and hold both the Mute button ( ) on the control console and the OK button
on the remote at the same time for five seconds. The power light blinks when pairing
is complete.
4. Press any remote button and verify that the power light on the control console blinks
with each button press.
Performing a system software update
System software updates are available periodically from Bose and can be downloaded
over the Internet to the USB drive included with your system.
1. Press the Setup button on the front of the control console to display the UNIFY
®
menu.
2. Using the remote navigation buttons, select Update.
3. Follow the instructions on the screen.
Note: To make sure your Bose remote is updated, hold the remote near the front of the control
console while it is being updated.
No TV picture, but audio is
heard
Check the TV video input selection. Make sure it is correct for the video
source.
Make sure video cables are securely connected.
A connected device does
not respond consistently to
remote commands
Try connecting the included external IR emitter to the control console.
For guidance, press the Setup button on the control console. Select
the device options and follow the onscreen instructions.
Intermittent audio dropouts
heard on coaxial digital
audio inputs
Contact Bose
®
Customer Service to request a composite video cable
that can be used for the coaxial digital audio connection.
Problem What to do
Defender OpG.book Page 26 Thursday, November 10, 2011 11:44 AM
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Comments to this Manuals

No comments