Bose ControlSpace AMS-8 User's Guide Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
English
Press the button to change the name of the connected source. The following window will appear:
Enter a (new) source name and press the OK button to store the name.
Up to 12 characters can be used to display the source name on the LCD-display of the Wall Controller.
When the button is pressed to change the input gain, below module is opened. Within this module
the gain level of each separate (mono) input on each Twin Input Card (placed in each system rack), can
be changed. If an input card is configured as a stereo input, the fader changes the level of both input
channels at the same time. The gain can be changed between -30dB and +30dB, using the gain fader.
The VU-meter shows the actual sound level of the connected source. Make sure all input gains are set to
obtain an equal level for all connected sources. All input levels should be set (leveled) at 0dB to create
around 3dB of headroom (peak level) on all inputs. Continuous high input levels can result in distorted
output signals and these can even result in a damaged input card. When more then one system rack is
connected, it is possible to change the input gain of each Twin Input Card in a system rack separate from
all other system racks. Below picture shows input ‘Source 1L’ on the first system rack. To change the gain
of the same input’ but on another system rack, simply press on e.g. ‘Rack 6, to change the input gain of
‘Source 1L’ on system rack 6.
*Note: To use a microphone, connected to a Local Input Module, in talk over mode, one needs to make sure
the microphone level is set above the auxiliary level. With the above VU-meter function of the input
gain module, one first needs to set the level of the microphone gain about 3 to 6 dB higher, using
the microphone gain adjuster located on the Local Input Module. Make sure to set the microphone
level equal to the other sources connected to the AMS-8 system, using the above procedure.
1. ControlSpace
AMS-8 LIVE Installer Software
1.2.2 Input name
1.2.3 Input Gain
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments