Bose ControlSpace AMS-8 User's Guide download pdf (Page 11)

Info Field

English

With this module one can configure/change the Room Combining Presets and program the Paging Panel

Buttons and GPIO Contacts.

1.4 Room combining/ Paging/ GPIO settings

Press or use the following buttons or faders to:

use this module to configure or change Room Combining Presets

use this module to configure or change Paging Panel Buttons

use this module to configure or change GPIO Contacts

change the name of a preset, paging button/zone or contact

change the ‘Default Active’ settings (only for Room Combining Presets). A preset which has

the status ‘Default Active’ will be active when the system is started up as long as there is no

Room-overlap between different presets which need to be active at the same time.

change the ‘User Enable/Disable’ settings (only for Room Combining Presets).

Only if set to ‘User Enabled’, the user is allowed to turn a preset on or off.

change up to 3 additional paging levels (only in combination with Privileged User Software).

See below picture

upload the new Preset, Paging and Contact settings to the AMS-8 system rack

1. ControlSpace

™

AMS-8 LIVE Installer Software

1.4.1 Preset/Paging/Contact module

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Bose ControlSpace AMS-8 User's Guide Page 11