Bose SoundTouch Stereo JC series II Wi-Fi music system Technical Information download pdf (Page 31)

Appendices

English - 31

Appendix B: Wall mounting the

SoundTouch™ wireless adapter

Vertical

orientation

Connector

panel is

facing left.

Horizontal

orientation

Connector panel

is facing up.

Follow these instructions to wall mount your SoundTouch

™

wireless adapter. Install

either vertically with the connector panel facing left, or horizontally with the con-

nector panel facing up.

Note: Mounting hardware must be purchased separately. If the mounting

hardware instructions differ from these instructions, follow the mounting

hardware instructions.

• Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with

a ⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws.

• Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill

pilot hole with a ³/

16 in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic

wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.

¼ in. (6.35 mm)

above surface

Wood

¼ in. (6.35 mm)

above surface

Wallboard

1. Mark holes on the wall 6¼ in. (158.7 mm) center-to-center.

2. Drill holes. Insert anchors (if used).

3. Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.

4. Position SoundTouch

™

wireless adapter onto screws. Press ﬁrmly into place.

1 2 ... 26 27 28 29 30 31 32 33 34

No comments

Bose SoundTouch Stereo JC series II Wi-Fi music system Technical Information Page 31