Bose SoundTouch Stereo JC series II Wi-Fi music system Technical Information download pdf (Page 22)

22 - English

ADAPTiQ

Performing the ADAPTiQ

calibration

What you need:

SoundTouch

™

controller

ADAPTiQ

headset

The ADAPTiQ

audio calibration system customizes the sound of your system to

the acoustics of your listening area.

Note: You must complete SoundTouch

™

setup before performing ADAPTiQ

audio

calibration. See “Adding the system to your Wi-Fi

network” on page 10.

To perform a calibration, you need about ten minutes when the room is quiet.

While wearing the special headset, the system prompts you to sit in ﬁve different

locations in your listening area as the system takes measurements in each one.

Audio prompts from the system guide you through the process.

1. Plug the ADAPTiQ

headset into the Audio IN connectors in the back

of the Acoustimass

module. Be sure to match the colors, red-to-red

and white-to-white.

Right (R, red)

Left (L, white)

ADAPTiQ

headset

2. Put the headset on your head so the left and right sensors rest above your

ears. This headset allows the system to hear exactly what you hear.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

No comments

Bose SoundTouch Stereo JC series II Wi-Fi music system Technical Information Page 22