Bose VideoWave III Technical Information Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16 - English
Controlling Your Sources
Entering channel numbers
The numbers along the top of the control frame appear for any
source that uses a keypad on an infrared (IR) remote control.
Although these controls are primarily used for entering channel
numbers for a set-top box, you can use them to select chapter
numbers for a DVD player or track numbers for a CD player.
When you enter a number, it appears in a queue on the screen.
The number of digits the queue can hold is set at the factory to
a maximum of 3 digits. If your set-top box requires a different
number of digits for channel numbers, you can change this in
the Options menu (page 24). For example, if you need to enter
channel numbers as high as 9999, you will need to change the
number of digits to 4. If your set-top box only goes up to channel
99, then you should set the number of digits to 2.
To enter a channel number:
1. Using the click pad remote control, select the first digit of
the channel number.
The channel number queue appears on the screen
containing the first digit.
2. Select the remaining digits and add them to the queue.
3. After selecting the last digit, wait for the queue to shift the
numbers to the left, indicating that they are being sent to the
source.
Or,
Press the OK remote control button to send the numbers
immediately.
Channel number queue
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comments to this Manuals

No comments