Bose VideoWave III Technical Information Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
English - 11
Turning the system on/off
To turn the system on, press the Power
button
on the remote control. When
the system starts up, it also automati-
cally turns on your set-top box (cable,
satellite, etc.).
The status indicator on the control
console and on the monitor indicates the
system status.
While the system starts up, the monitor
emits a start-up tone and displays the
Bose
®
logo with a progress bar under it.
Power
Notes:
• When you turn the system on, it will always select and turn on
your cable or satellite box.
• To keep energy consumption to a minimum, the system oper-
ates in a very low power state when it is off. This is why the
system may take several seconds to start.
To turn the system off, including the connected source, press
the Power button
on the remote control. The system now op-
erates in power saving mode to conserve energy consumption.
Power saving mode
Power saving mode allows the system to consume only a
minimum amount of power.
To switch the system to power saving mode, press and hold
the Power button
for 10 seconds or until the control console
system status light changes to red or amber, indicating the type
of power saving mode as shown in the following table.
Control console system status indicator
Control console
system status
indicator Status
Off The system is off.
Blinking green Starting up.
Solid green On and ready to use.
Amber
The system is shutting down or charging iPod
or iPhone—the system is off and operating in
power saving mode, but charging iPod or iPhone
(using a Bose iPod or iPhone dock accessory,
available for purchase from Bose).
Monitor status indicator
Monitor status
indicator Status
Blinking green Starting up.
Solid green Video muted (see page 18).
Slow blinking red
Power removed from the monitor, but not the
control console.
Slow blinking red
alternating with
blinking green until
power is restored
System is shutting down in 10 seconds due to an
error. If the problem persists, contact Bose. See
the contact sheet included with your system.
Basic System Operation
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Comments to this Manuals

No comments