Bose Lifestyle DVD Home Entertainment Systems Operations Instructions download pdf (Page 52)

52

US

There is no picture when you make an HDMI

cable connection.

t The unit is connected to an input device that is

not HDCP (High-bandwidth Digital Content

Protection) compliant (“HDMI” on the front

panel does not light up) (page 16).

3D images from the HDMI (IN 1) or HDMI (IN

2) jack do not appear on the TV screen.

t Depending on the TV or video component, 3D

images may not appear.

No picture appears when the video output

resolution selected in [Output Video Format]

is incorrect.

t Press and hold N and VOL – on the unit for

more than 5 seconds to reset the video output

resolution to the lowest resolution.

The dark area of the picture is too dark/the

bright area is too bright or unnatural.

t Set [Picture Quality Mode] to [Standard]

(default) (page 31).

The picture is not output correctly.

t Check the [Output Video Format] settings in

[Screen Settings] (page 43).

t If the analog and digital signals are output at

the same time, set [BD-ROM 24p Output] or

[DVD-ROM 24p Output] in [Screen Settings]

to [Off] (page 43).

t For BD-ROMs, check the [BD-ROM 24p

Output] settings in [Screen Settings] (page 43).

Picture noise appears.

t Clean the disc.

t If the picture output from your system goes

through your VCR to get to your TV, the copy-

protection signal applied to some BD/DVD

programs could affect picture quality. If you

still experience problems even when you

connect your unit directly to your TV, try

connecting your unit to the other input jacks.

An image is not displayed on the entire TV

screen.

t Check the setting of [TV Type] in [Screen

Settings](page 43).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

t If the speakers are used with a CRT-based TV

or projector, install the speakers at least 1.0 ft

(0.3 meters) from the TV set.

t If the color irregularity persists, turn off the TV

set once, then turn it on after 15 to 30 minutes.

t Make sure that no magnetic object (magnetic

latch on a TV stand, health care device, toy,

etc.) is placed near the speakers.

There is no picture after playing a video/

photo file on the iPod/iPhone.

t Select the input on your TV for this system.

There is no sound.

t The speaker cords are not connected securely.

t Check the speaker settings (page 36).

The Super Audio CD sound of a component

that is connected to the HDMI (IN 1) or HDMI

(IN 2) jack is not output.

t HDMI (IN 1) and HDMI (IN 2) does not accept

an audio format that contains copy protection.

Connect the analog audio output of the

component to the AUDIO (AUDIO IN L/R)

jacks of the unit.

There is no sound from the TV via the HDMI

(OUT) jack when using the Audio Return

Channel function.

t Set [Control for HDMI] in [HDMI Settings] of

[System Settings] to [On] (page 46). Also, set

[Audio Return Channel] in [HDMI Settings] of

[System Settings] to [Auto] (page 46).

t Make sure that your TV is compatible with the

Audio Return Channel function.

t Make sure that an HDMI cable is connected to

a jack on your TV that is compatible with the

Audio Return Channel function.

The system does not output sound of TV

programs correctly when connected to a set-

top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]

(page 46).

t Check the connections (page 17).

Sound

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Comments to this Manuals

No comments