Bose CE-1 CONTROL EXPANDER UNIT Operations Instructions Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
77
GB
Additional Information
There is no picture or an unclear
picture appears on the TV screen.
Select the appropriate input using the input
buttons.
Set your TV to the appropriate input mode.
Move your audio components away from
the TV.
Depending on the DIGITAL MEDIA
PORT adapter, video output may not be
possible.
The source image input to the VIDEO IN
or COMPONENT VIDEO IN jacks is not
output from the TV.
Check that your component is connected
to the MONITOR OUT jack (page 21).
Make sure “CTRL:HDMI” is set to
“CTRL OFF” in HDMI menu (page 42).
Recording cannot be carried out.
Check that the components are connected
correctly (page 23).
Select the source component using the
input buttons (page 36).
The source sound input to the HDMI
jack on the receiver is not output from
the receiver or the TV speaker.
Check the HDMI connection (page 24).
You cannot listen to the Super Audio CD
by connecting HDMI.
Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Be sure to use a High Speed HDMI cable
when you view images or listen to sound
during Deep Colour or 3D transmission.
The source image input to the HDMI
jack on the receiver is not output from
the TV.
Check the HDMI connection.
Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Be sure to use a High Speed HDMI cable
when you view images or listen to sound
during Deep Colour or 3D transmission.
The control for HDMI function does not
work.
• Check the HDMI connection (page 24).
• Make sure “CTRL:HDMI” is set to
“CTRL ON” in HDMI menu.
Make sure the connected component is
compatible with the Control for HDMI
function.
Check the Control for HDMI settings on
the connected component. See the
operating instructions of the connected
component.
• If you change the HDMI connection,
connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of “Preparing for the
“BRAVIA” Sync” (page 61).
Video
HDMI
continued
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83 84

Comments to this Manuals

No comments