Bose T1 User Manual download pdf (Page 61)

CARE & MAINTENANCE

SvenskaItalianoFrançaisEspañolDeutschDanskEnglish Nederlands

Technical information

Mechanical

Dimensions: .... 8.22" (L) x 6.52" (W) x 2.66" (H)

208.9mm (L) x 165.5mm (W) x 67.6mm (H)

Weight: ............2.14 lb (0.97 kg)

Electrical

A/D and D/A conversion:.....24 bits

Sampling rate: .....................48 kHz

USB:....................................1.1 protocol, Type A to Type B cable

PC requirements: ................Microsoft Windows 2000, 2000 Pro, XP

Unable to send audio from

a computer to the T1 via

USB connection.

• Check that the USB cable is properly connected to the audio engine and computer.

• Try a different USB cable.

• Make sure audio engine is turned on.

• Verify the computer is playing and that the audio setting is not disabled in your computer.

• Check that the USB signal is assigned to the desired audio engine inputs. See “PC to USB” in the Prefs menu.

• Verify that the audio engine input channels assigned to the incoming USB signal are not muted and their volume

controls are turned up.

• Make sure that the appropriate input channel Trim control is turned up enough so that the green LED is on

(indicating that there is a strong input signal).

• Check the Input and Output level meters under the Prefs menu to confirm that there is a signal at both the input

and output stages.

• Verify that your computer USB output is working by connecting another USB-compatible audio device.

• If you are using recording software on a computer, check the software requirements. You may need to configure

the software settings for 48kHz/24-bit operation.

Problem What to do

1 2 ... 56 57 58 59 60 61 62

No comments

Bose T1 User Manual Page 61