Bose SoundTouch SA-4 Technical Information download pdf (Page 18)

Using the System

18 - English

Wall mounting the SoundTouch™ controller

WARNING: The wall mount bracket contains magnetic material. Please

contact your physician if you have any questions whether this might

affect the operation of your implantable medical device.

Follow these instructions to wall mount your SoundTouch

™

controller. Use the

bracket as a template to mark the holes.

Wallboard (anchors and screws supplied):

1. Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.5 mm)

or thicker wallboard.

2. Insert the provided anchors into the holes and tap lightly to secure.

3. Align the bracket (tab at top) to the anchors. Tighten the provided screws into

the holes.

4. Align the latch to the bracket's tab. Attach the controller.

Wood:

1. Purchase two #6x1 in. (25.4 mm) ﬂat-head wood screws.

2. Use a

/64 in. (2.78 mm) drill bit to drill 2 holes into ³/4 in. (19 mm)

or thicker wood.

3. Align the bracket (tab at top) to the holes. Tighten the screws into the holes.

4. Align the latch to the bracket's tab. Attach the controller.

Tab

Bracket

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

Bose SoundTouch SA-4 Technical Information Page 18