Bose Wave Radio II Operations Instructions download pdf (Page 19)

English – 19

PERSONALIZING YOUR WAVE

MUSIC SYSTEM III

Adjusting the display

brightness

The brightness level of the display automatically adjusts

itself for low and high ambient light conditions. This

feature brightens the display for better visibility in high

ambient light conditions and dims the display making it

less intrusive in low ambient light conditions. High and

low brightness settings can be set independently.

1. Press and hold Alarm Setup (Menu)

until -SETUP MENU- is displayed.

2. Press Tune/MP3

> five times until

BRIGHT HI- is displayed.

3. Press Time – or Time + to set the

high display brightness level to a

value from 8-15.

4. Press Tune/MP3

> once until

BRIGHT LO- is displayed.

5. Press Time – or Time + to set the

low display brightness level from 1-8.

6. Press Alarm Setup (Menu) to exit

the setup menu or wait 10 seconds for

the setup menu to exit automatically.

Setting the room code

You r Wav e

music system III comes from the factory

ready to operate as a second room (room code B) when

connected to a Bose

link enabled Lifestyle

system. If

you want to use your Wave

music system III with your

Lifestyle

system beyond a second room you will need to

change the room code to match that of the remote

control you are using for that room.

Refer to your Lifestyle

system owner’s guide for more

information on room codes.

1. Press and hold Alarm Setup (Menu)

until -SETUP MENU- is displayed.

2. Press Tune/MP3

> seven times until

ROOM- B is displayed. The

dashes following the room letter indi-

cate how the microswitches should

be set on the Lifestyle

remote

control.

3. Press Time – or Time + to select a

room code other than room B.

4. Press Alarm Setup (Menu) to exit

the setup menu or wait 10 seconds for

the setup menu to exit automatically.

Turning the touch pad

on or off

If you do not wish to use the touch pad feature you can

turn it off.

1. Press and hold Alarm Setup (Menu)

until -SETUP MENU- is displayed.

2. Press Tune/MP3

> eight times until

TOUCH PAD- is displayed.

3. Press Time – or Time + to select

OFF or ON.

4. Press Alarm Setup (Menu) to exit

the setup menu or wait 10 seconds for

the setup menu to exit automatically.

Changing the system

standby timeout

1. Press and hold Alarm Setup (Menu)

until -SETUP MENU- is displayed.

2. Press Tune/MP3

> nine times until

AUTO OFF- is displayed.

3. Press Time – or Time + to select NO

or YES.

4. Press Alarm Setup (Menu) to exit

the setup menu or wait 10 seconds for

the setup menu to exit automatically.

Seine_A_OG.book Page 19 Wednesday, November 9, 2011 9:04 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comments to this Manuals

No comments

Bose Wave Radio II Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Alarm clocks Bose Wave Radio II