Bose WAVE(R) RADIO III Operations Instructions download pdf (Page 3)

English – 3

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions – for all components

before using this product.

2. Keep these instructions – for future reference.

3. Heed all warnings – on the product and in the

owner’s guide.

4. Follow all instructions.

5. Do not use this apparatus near water or

moisture – Do not use this product near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet

basement, near a swimming pool, or anywhere else

that water or moisture are present.

6. Clean only with a dry cloth – and as directed by

Bose Corporation. Unplug this product from the wall

outlet before cleaning.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions – To ensure reliable operation of the

product and to protect it from overheating, put the

product in a position and location that will not

interfere with its proper ventilation. For example, do

not place the product on a bed, sofa, or similar

surface that may block the ventilation openings. Do

not put it in a built-in system, such as a bookcase or

a cabinet that may keep air from flowing through its

ventilation openings.

8. Do not install near any heat sources, such as

radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wider blade

or third prong are provided for your safety. If

the provided plug does not fit in your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched, particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket or table specified by

the manufacturer or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time – to

prevent damage to this product.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way: such

as power-supply cord or plug is damaged;

liquid has been spilled or objects have fallen

into the apparatus; the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped – Do not attempt

to service this product yourself. Opening or

removing covers may expose you to dangerous

voltages or other hazards. Please call Bose to be

referred to an authorized service center near you.

15. To prevent risk of fire or electric shock, avoid

overloading wall outlets, extension cords, or

integral convenience receptacles.

16. Do not let objects or liquids enter the product

– as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric

shock.

17. See product enclosure bottom for safety

related markings.

18. Use Proper Power Sources – Plug the product

into a proper power source, as described in the

operating instructions or as marked on the product.

19. Avoid Power Lines – Use extreme care when

installing an outside antenna system to keep from

touching power lines or circuits, as contact with

them may be fatal. Do not install external antennas

near overhead power lines or other electric light or

power circuits, nor where an antenna can fall into

such circuits or power lines.

20. Ground All Outdoor Antennas – If an external

antenna or cable system is connected to this

product, be sure the antenna or cable system is

grounded. This will provide some protection against

voltage surges and built-up static charges.

Section 810 of the National Electrical Code ANSI/

NFPA No. 70 provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit,

onnectio

n to grounding electrodes, and

requirements for the ground electrode. Refer to the

antenna grounding illustration on the next page.

Seine_SRA_OG.book Page 3 Monday, November 7, 2011 11:54 AM

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

Bose WAVE(R) RADIO III Operations Instructions Page 3

Comments to this Manuals

Related products and manuals for Alarm clocks Bose WAVE(R) RADIO III