Bose Acoustimass 6 User Manual download pdf (Page 12)

12 December 20, 2001 AM189815_04_V.pdf

LEFT CENTER RIGHT LEFT RIGHT

SURROUND SURROUND

FROM RECEIVER OR AMPLIFIER

LCRLSRS

INPUTS

RCL

RS LS

TO CUBE SPEAKERS

LCRLSRS

OUTPUTS

SURROUND SPEAKERS

L REAR R CENTER

FRONT SPEAKERS

Setting Up

Check the connections

Check all connections from the receiver to the Acoustimass

module and the module to the

cube speakers, making sure the two speakers with black terminals are connected as front

speakers (Figure 11). Check to be sure all speakers are connected to the proper terminals

according to their position in your room (Figure 12).

At the receiver, make sure the wires are connected in phase (+ to + and – to –). Incorrect

wiring can result in a total loss of Acoustimass module output.

Be sure to correct any wiring problems before you plug your receiver in and turn it on.

Figure 12

Completed connections

L/R

Figure 11

Black connector and terminal

marked L/R on both the front left

and front right speakers

CAUTION:

Do not allow exposed wires to

brush against each other; this

could damage your receiver.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Bose Acoustimass 6 User Manual Page 12