Bose Acoustimass 6 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
AM189815_04_V.pdf December 20, 2001 11
Setting Up
At the Acoustimass
®
module, check to be sure the connectors are firmly inserted into the
proper OUTPUT TO CUBE SPEAKER jacks.
The black L connector goes into the L jack.
The gray C connector goes into the C jack.
The black R connector goes into the R jack.
Connect the module to the surround cube speakers
Use the 50 foot (15 m) cable with gray connectors to join the Acoustimass module to the
surround speakers.
The gray connector marked LS goes into the gray terminal on the left surround speaker
(to your left as you face the TV).
The gray connector marked RS goes into the gray terminal on the right surround
speaker.
At the Acoustimass module, make sure the gray connectors are firmly inserted into the LS
and RS OUTPUT TO CUBE SPEAKER jacks.
Connect the module to the receiver
Use the 20 foot (6 m) cable with five wire pairs to connect the Acoustimass module to your
surround sound receiver.
1. Connect all wires to the receiver in phase (+ to + and – to –).
a. Connect each wire marked with a red collar (+) to the appropriate red (+) output.
b. Connect each plain wire (–) to the appropriate black (–) output.
2. Match the label on the red collar of each wire pair to the SPEAKER OUTPUT label on
the receiver:
a. LEFT wires go to the LEFT FRONT SPEAKER OUTPUT connections.
b. CENTER wires go to the CENTER SPEAKER OUTPUT connections.
c. RIGHT wires go to the RIGHT FRONT SPEAKER OUTPUT connections.
d. LEFT SURROUND wires go to the LEFT SURROUND (rear) SPEAKER OUTPUT
connections.
e. RIGHT SURROUND wires go to the RIGHT SURROUND (rear) SPEAKER OUTPUT
connections.
3. At the Acoustimass module, check to make sure all connectors are firmly inserted into
the proper INPUT FROM RECEIVER OR AMPLIFIER jacks. Black connectors go into L
and R jacks. Gray connectors go into C, LS, and RS jacks.
CAUTION:
Do not connect the Acousti-
mass module directly to your
television unless the television
provides surround decoding
circuitry and amplified outputs
for all channels.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments