Bose Acoustimass - 10 User Manual download pdf (Page 9)

AM183644_01_V.pdf December 20, 2001 9

Setting Up

Connect the Acoustimass

module to the center and front cube

speakers

Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to

the center and front cube speakers. Just press the custom RCA connectors in place.

1. Insert the gray connector marked C

into the gray terminal on the center

speaker.

2. Insert the black connector marked L

into the black terminal on the left front

speaker (to the left of the TV as you

face it), and the black connector

marked R to the black terminal on the

right front speaker.

3. At the Acoustimass module, check to

be sure the connectors are firmly

inserted into the proper OUTPUT TO

CUBE SPEAKER jacks.

a. Black L connector to the L jack.

b. Gray C connector to the C jack.

c. Black R connector to the R jack.

Figure 8

Making cube speaker

connections

Connect the Acoustimass module to the surround cube

speakers

Use the 50 foot (15 m) cable with gray RCA connectors to join the module to the surround

speakers.

1. Insert the gray connector marked LS into the gray terminal on the left surround speaker

(on your left as you face the TV).

2. Insert the gray connector marked RS into the gray terminal on the right surround

speaker.

3. At the Acoustimass module, make sure the gray connectors are firmly inserted into the

LS and RS OUTPUT TO SPEAKER jacks.

Connect the Acoustimass module to the receiver

Use the 20 foot (6 m) cable with five wire pairs to connect the Acoustimass module to your

surround sound receiver.

1. Match the wire labels to the SPEAKER OUTPUT labels on the receiver:

a. L wires go to the Left Front SPEAKER OUTPUT connections.

b. C wires go to the Center SPEAKER OUTPUT connections.

c. R wires go to the Right Front SPEAKER OUTPUT connections.

d. LS wires go to the Left Surround (rear) SPEAKER OUTPUT connections.

e. RS wires go to the Right Surround (rear) SPEAKER OUTPUT connections.

2. Match the polarity on the receiver. Connect the wire pairs in phase (+ to + and – to –).

a. Connect each wire marked with a red collar (+) to the appropriate red (+) output.

b. Connect each plain wire (–) to the appropriate black (–) output.

3. At the Acoustimass module, check to make sure all RCA connectors are firmly inserted

into the proper INPUT FROM RECEIVER OR AMPLIFIER jacks. Black connectors go

into L and R jacks. Gray connectors go into C, LS, and RS jacks.

CAUTION:

Do not connect the

Acoustimass module directly

to your television unless the

television provides surround

decoding circuitry and

amplified outputs for all

channels.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comments to this Manuals

No comments

Bose Acoustimass - 10 User Manual Page 9

Comments to this Manuals

Related products and manuals for Acoustics Bose Acoustimass - 10